Display & Solution
Laser Light-source Projectors

PA803UL

Model NP-PA803UL NP-PA703UL
Method Three primary colour liquid crystal shutter projection
Specifications of main parts 　
　 Liquid crystal panel Size 0.76" (with DMLA) × 3 (aspect ratio: 16:10)
Pixels*1 2,304,000 (1,920 dots × 1,200 lines)
Projection lenses*2 Zoom Motorised (Digital Zoom) (zoom range depends on lens)
Focus Motorised
Lens shifting Refer to Lens specifications
Light source Laser diode
Light source (laser diode) life*3 20,000 H
Light output*3 *4 *5 *6 Normal mode 8,000 lumens 7,000 lumens
ECO 1 mode 6,400 lumens 5,600 lumens
ECO 2 mode 4,800 lumens 4,200 lumens
Long life mode 2,400 lumens 2,100 lumens
Contrast ratio*5
(all white / all black)		 2,500k: 1 with dynamic contrast
Screen size (throw distance) 50" to 500" (throw distance depends on lens)
Colour reproducibility 10-bit colour processing (approx. 1.07 billion colours)
Scan rate Horizontal Analogue: 15 kHz, 24 to 100 kHz (24 kHz or greater for RGB inputs),
conforms to VESA standards
/ Digital: 15 kHz, 24 to 153 kHz, conforms to VESA standards
Vertical Analogue: 48 Hz, 50 to 85 Hz, 100, 120 Hz conforms to VESA standards /
Digital: 24, 25, 30, 48 Hz, 50 to 85 Hz, 100, 120 Hz conforms to VESA standards
Maximum resolution
(horizontal × vertical)		 Analogue: 1,920 × 1,200 (with Advanced AccuBlend)
/ Digital: 4,096 × 2,160 (with Advanced AccuBlend)
Keystone Correction Horizontal Manual, Approx. ± 40 Max degrees
Vertical Manual, Approx. ± 40 Max degrees
Input/output  connectors 　
　 Computer / Component Video input Mini D-Sub 15-pin × 1
Audio input Stereo mini jack × 1
Audio output Stereo mini jack × 1 (common for all signals)
HDMI Video input Type A HDMI connector × 2, Deep Colour (colour depth): Support 8bits, 10bits, 12bits, Colourimetry Support: RGB, YCbCr444, YCbCr422, YCbCr420, Rec.2020, Rec.709, Rec.601, Support 4K, 3D, HDCP*7, LipSync, HDR
Audio input Yes
HDBaseT / Ethernet Port Video input RJ45 × 1, Support 100BASE-TX, Deep Colour (colour depth): Support 8bits, 10bits, 12bits, Colourimetry Support: RGB, YCbCr444, YCbCr422, YCbCr420, Rec.2020, Rec.709, Rec.601, Support 4K, 3D, HDCP*7, LipSync, HDR
Audio input Yes
Video output RJ45 × 1, Support 100BASE-TX, Deep Colour (colour depth): Support 8bits, 10bits, 12bits, Colourimetry Support: RGB, YCbCr444, YCbCr422, Rec.709, Rec.601, Support 4K, 3D, HDCP*7, LipSync
Audio output Yes
DisplayPort Video input DisplayPort 20 pin connecter × 1, Deep Colour (colour depth): Support 8bits, 10bits, 12bits, Colourimetry Support: RGB, YCbCr444, YCbCr422, Rec.709, Rec.601, Support 4K, 3D, HDCP*7
Audio input Yes
PC control connector D-Sub 9-pin × 1
USB port USB type A × 1,
(USB 2.0 High speed / Full speed / Low speed) for Mouse
Ethernet / LAN / HDBaseT port RJ-45 × 1, Supports 10BASE-T / 100BASE-TX, HDBaseT
Remote connector Stereo mini jack × 1
3D SYNC output terminal 5 V / 10 mA, synchronized signal output for 3D use
Usage environment Operating temperature: 5 to 40°C*8,
Operating humidity: 20 to 80 % (with no condensation)
Storage temperature: -10 to 50°C,
Storage humidity: 20 to 80 % (with no condensation)
Operating altitude: 0 to 3,650 m
(1,700 to 3,650 m: Set [FAN MODE] to [HIGH ALTITUDE])
Power supply 100 – 240 V AC, 50/60 Hz
Power consumption Normal mode 798 W (100 – 130 V) /
774 W (200 – 240 V)　		 647 W (100 – 130 V) /
632 W (200 – 240 V)　
ECO 1 mode 604 W (100 – 130 V) /
592 W (200 – 240 V)　		 531 W (100 – 130 V) /
522 W (200 – 240 V)
ECO 2 mode 470 W (100 – 130 V) /
464 W (200 – 240 V)　		 414 W (100 – 130 V) /
410 W (200 – 240 V)　
Long life mode 285 W (100 – 130 V) /
285 W (200 – 240 V)　		 276 W (100 – 130 V)/
 276 W (200 – 240 V)　
STANDBY
(Link-up)		 0.15 W (100 – 130 V) / 0.21 W (200 – 240 V)
STANDBY
(Link-down)*9		 0.11 W (100 – 130 V) / 0.16 W (200 – 240 V)
Rated input current 11.8 A – 5.2 A 10.5 A – 4.5 A
Dimensions (W × H × D) 580 × 205 × 490 mm
(Net dimensions, not including protruding parts),
909 × 322 × 731 mm (Gross dimensions)
Weight 18.2 kg (not including lens), 24.4 kg (Gross weight)

  • *1: Effective pixels are more than 99.99 %.
  • *2: Refer to Lens Specifications
  • *3: Time at which the laser light source is at half brightness; not a guaranteed time.
  • *4: This is the light output value (lumens) when the lens unit, NP41ZL, is mounted and when the [PRESET] mode is set to [HIGH-BRIGHT]. The light output values will be dropped according to the setting of [LIGHT MODE]. If any other mode is selected as the [PRESET] mode, the light output value may drop slightly.
  • *5: Compliance with ISO21118-2012
  • *6: When attached with NP41ZL
  • *7: If you are unable to view material via the HDMI DisplayPort and HDBaseT input, this does not necessarily mean the projector is not functioning properly. With the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP community. (Digital Content Protection, LLC). Video: HDR, Deep Colour, 8/10/12-bit, Lip Sync. Audio: LPCM; up to 2 ch, sample rate 32/44.1/48 kHz, sample bit; 16/20/24-bit, HDMI: Supports HDCP2.2/1.4, DisplayPort: Supports HDCP1.4, HDBaseT: Supports HDCP2.2/1.4
  • *8: Depending on the altitude and temperature, the projector goes into “Forced ECO Mode” when [NORMAL] or [ECO1] has been selected for [LIGHT MODE].
  • *9: Internal measured value. All wired network ports are connected and active.

[PDF]Brochure Download ： WLPJ-1906-0012N.pdf (1.55MB)