Display & Solution
Laser Light-source Projectors

PX1005QL-W / PX1005QL-B

Model NP-PX1005QL-W / NP-PX1005QL-B
Projector Type 1 chip DMD reflection type
Specifications of main parts Main panel Size 0.66 inch DMD (aspect ratio: 16:9)
Resolution 4K UHD (3,840 dots × 2,160 lines),
(DMD Native : 2,716 dots × 1,528 lines)
Pixels Numbers*1 8,294,400 pixels, (DMD Native : 4,150,048 pixels)
Projection lenses*2 Zoom/Focus Power-adjustable
Lens shift Power, Horizontal: L10%/R20%, Vertical: +50%/–30%
Light source Laser diode
Light source (laser diode) life*3 20,000 hours (50% brightness)*3
Optical unit C/W type (DLP) Colour separation by colour wheel;
time-multiplexing colour wheel method
Light output*4*5 Normal mode 10,000 lumens ( NP18ZL-4K)
ECO1 /ECO2 Approx. 80%/ Approx. 50%
Contrast ratio*5 (all white /all black) 10,000:1 with dynamic contrast
Screen size Please refer to the specifications of option lens
Colour reproduction 10-bit signal processing (approx. 1.07 billion colours)
Quietness (ECO2 / ECO1 / Normal mode) 37 dB/ 39 dB/ 42 dB
Scanning frequency (Synchronization) Horizontal 15 kHz, 24 to 153 kHz
Vertical 24 Hz, 25 Hz, 30 Hz, 48 Hz, 50 to 85 Hz, 100 Hz, 120 Hz
Max. display resolution
(horizontal × vertical )		 Digital: 4,096 × 2,160 Pixel clock frequency: less than 594 MHz
Keystone Correction Horizontal Manual, Approx. ± 40 Max degrees
Vertical Manual, Approx. ± 40 Max degrees
Input/output connectors HDMI® input terminals Video input Type A 19-pin HDMI® connector with HDCP (V1.4 / 2.2) × 2
Enables: 18Gbps, Deep Colour (8 bit, 10 bit, 12 bit), HDR,
Colourimetry Support: RGB, YCbCr444, YCbCr422, YCbCr420, REC2020, REC709, REC601, HDCP*6,
4K (30/60 Hz)
Ethernet/ HDBaseT™ port Video input RJ45 with HDCP (V1.4 / 2.2) × 1 ( IEEE 802.3 / 802.3u/ 100BASE-TX),
shared with Ethernet Deep Colour (8 bit, 10 bit, 12 bit),
Colourimetry Supports: RGB, YCbCr444, YCbCr422, YCbCr420, REC2020, REC709, REC601 HDCP*6, 4K (30/60 Hz)
DisplayPort™ Video input DisplayPort 20-pin connector with HDCP (V1.4) × 2 Enables: 21.6Gbps,
Main link rates: HBR2/HBR/RBR per lane,
Main Link: 1/2/4 lane Link rate, Deep Colour (8 bit, 10 bit, 12 bit),
Colourimetry Support: RGB, YCbCr444, YCbCr422, REC709, REC601 HDCP*6, 4K (30/60 Hz)
3G SDI Video input 3G/HD SDI, BNC 1-pin × 4 (Single/ Dual/ Quad input)
Input signal: SMPTE292M, SMPTE424M, Colorimetry:
RGB, YCbCr444, YCbCr422
PC control connector D-Sub 9-pin × 1 (4,800 / 9,600 / 19,200 / 38,400 / 115,200 bps)
USB port USB type A × 1 <For future expansion>
LAN port RJ-45 × 1, (IEEE 802.3 / 802.3u 10BASE-T/ 100BASE-TX),
shared with Ethernet
Remote connector Stereo mini jack × 1
Option slot OPS SBC unit × 1
Usage environment Operating temperature: 5 to 40°C*7,
operating humidity: 0 to 80% (with no condensation)
Storage temperature: –10 to 60°C,
storage humidity: 0 to 90% (with no condensation)
Operating altitude: 0 to 3,000 m
Power requirement 110 – 240 V AC, 50 /60 Hz
Power consumption Normal 1,181 W (110 – 130 V AC), 1,222 W (200 – 240 V AC)
ECO1 1,002 W (110 – 130 V AC), 977 W (200 – 240 V AC)
ECO2 658 W (110 – 130 V AC), 648 W (200 – 240 V AC)
STANDBY (NORMAL) 0.33 W (110 – 130 V AC), 0.35 W (200 – 240 V AC)
STANDBY (NETWORK)*8 0.88 W (110 – 130 V AC), 0.92 W (200 – 240 V AC)
Input current 12.5 A – 5.5 A
Cabinet colour White: -W, Black: -B
Dimensions ( W × H × D) 500 × 216 × 583 mm (not including lens)
500 × 211 × 577 mm (not including protruding parts)
Weight 31.2 kg (not including lens)
  • *1:Effective pixels are more than 99.99%.
  • *2:Refer to Lens Specifications
  • *3:Time at which the laser light source is at half brightness; not a guarantee time.
  • *4:This is the light output value (lumens) mounting the lens unit, NP18ZL-4K, when the [PRESET] mode is set to [HIGH-BRIGHT].
    The light output values will be dropped according to the setting of [LIGHT MODE].
    If any other mode is selected as the [PRESET] mode, the light output value may drop slightly.
  • *5:Compliance with ISO21118-2012
  • *6:If you are unable to view material via the HDMI, DisplayPort and HDBaseT input, this does not necessarily mean the projector is not functioning properly. With the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP community. (Digital Content Protection, LLC).
  • *7:Depending on the altitude and temperature, the projector goes into “Forced ECO Mode” in the state [NORMAL] or [ECO1] has been selected for [LIGHT MODE].
  • *8:Internal measured value. All wired network ports are connected and active.

• These specifications and the product’s design are subject to change without notice.

Brochure Download : WDPJ-1808-0012N.pdf (8.06MB)